Vali lehekülg

Roostevabast terasest kett (SS / SSK)

Superb resistance to corrosion and heat that allows use in just about all over the place
There are two forms of Stainless Steel Chain: SS and SSK. The SS type has the highest resistance to corrosion and heat. On the other hand, it is produced totally of austenite stainless steel and hence its tensile strength is slightly reduced than 70% of the standard roller chain, and highest allowable load drops to a little bit over 10%.
Through the use of precipitation hardened stainless steel for the pins, bushes and rollers, the SSK variety has one.five times higher highest allowable load compared to your SS type. Decide on SSK after you require a lot more strength than SS, or need longer product or service existence.
The two forms have equivalent corrosion resistance.
Soovitatavad kasutusviisid
?Nõrge leeliselise ja nõrga happega kokkupuutuvad probleemid
chemical agents, sea water and wastewater. Various chemical plats and water remedy plants.
? Olukorrad kõrge temperatuur
Kuumtöötlusahjud, kuivad ahjud, põletusahjud
Kettide kogu
Stainless Steel Chain has decrease regular tensile strength and highest allowable load compared to your conventional roller chain.
Lingilinkide ja kompenseeritud linkide ühendamine
R connecting back links are applied for Stainless Steel Chains #60 or smaller sized and C connecting links for #80 or more substantial. 2POJ offset back links are utilised for sizes #25, and OJ hyperlinks for all other sizes.
Typical sprockets for Stainless Steel chains may be employed because the dimensions would be the very same as normal roller chains.
Like a general residence of stainless steel, strain corrosion
cracking and pitting corrosion might be brought about by chlorine and chlorine ion (CR-).
The chart on ideal exhibits the information of tests within the level of corrosion resistance for every medium and will not promise the overall performance from the chains. Please consider the ailments, temperature, degree and other general condition when utilizing.