Vali lehekülg

The Taper Attach Direct Thread Adaptor offers a direct thread interface for taper mounted suppressors. Two models of wrench flats make it equally easy to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools necessary. Obtainable in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is convenient to have direct thread suppressor capability that may move from host to host without the need for added muzzle gadgets, it is crucial to remember that all host firearm must be checked for baffle alignment via visual inspection before firing.

The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 works extremely well up to .338 caliber.

The use of immediate thread adaptors improves on immediate thread mounted suppressors, by allowing the finish user to have modular thread pitches. One Taper Attach Suppressor to Rule ALL OF THEM.
Must nitreeritud
1.5 untsi kaal
Wrench Flats for each and every contingency
Taper Attach Repeatability and Stability
Mitme keermega mitmekülgsus teie koonuse paigaldamise summuti jaoks
taper adapters allow the application of holders or equipment with a different machine-side taper then your Taper Adapteri portselan machine spindle taper, such as by using a BT40 tapping chuck on a 50-taper spindle.

These adapters eliminate lead time losses in the event of a machine breakdown. Adapters may also assist in testing custom equipment on another machine compared to the planned production machine.

Taper adapters avoid the need for a way to obtain new holders or equipment for a specific machine. They arrive prepared to use with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking device for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the primary spindle of a machine tool
Järsk koonus on standarditud DIN 69871 1. osas
No self-locking (on the other hand with the Morse taper), thereby making tool improvements easier without clamping. That is particularly significant for computerized tool changes
Little clamping travel equals brief clamping time
High torsional rigidity because of the short distance between the leading edge and spindle bearing (brief overall length)
For adapting morse taper tools to milling equipment that take R8 tools
Legeermetall karastatud 50-52 rc
Kriitiliste pindade täppislihvimine
Kasutamine R8 masinates
Turning Tools More taper reducing sleeve is employed to convert your headstock from #2 MT to #1 MT. That is useful when you have a drive center or pen mandrel which is definitely 1MT and your headstock is 2MT