Vali lehekülg

Ussiajamiga mootoriga käigukast
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque result is required. Ideal for student based projects including robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap installed into its cradle to engage the apparatus and worm.
Detailid
1 - 6 V alalisvool
0.1A kuni 1A koormuse põhjal
Veovõlli pikkus: 12.5cm
Veovõll läbimõõt 3mm
Käigukasti suhe: 42: 1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and other applications where high torque is usually desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, also at very low voltages. We advise that you use stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, although it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new requirements for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style ussimootor offers easy integration now and a truly future proof alternative. The Ever-Power gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration options.
Ever-Power gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Toote omadused
Võimsus kuni 5,5 kW.
Pöördemoment 25… 1.000 Nm
Väljundkiirused 0,2… 300 min-1
mitmekülgsed paigaldusvõimalused
Täiesti suletud, suletud tolmu ja veepihuste eest
Määrde muutmine toimub kõigepealt 15000 tunni pärast
Madal müratase
Toitevõrguühendus 110… 690V, 50 / 60Hz
Korpus IP65 (tavaline), IP66 (valikuline)
Lisavõimalused:
Ühendamine Connect-pistikutega.
Sisseehitatud inverteriga kuni 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Mootorid Sobre 60034 järgi
Korrosioonikategooria põhineb standardil DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM käigumootorid
Ever-Power DC worm gear motors are the solution for applications requiring a corner turn, optional dual output, or an inability for the motor to be back again driven. The DC correct angle equipment motors are created for constant and intermittent duty procedure. Our right angle gear reducers are designed with several mounting plate options, making them perfect for a number of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
OMADUSED
1/43 kuni 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 - 475 p / min
Nimipöördemoment 1.5–315.9 in-lb
Raami suurus 60, 80, 108 mm
5: 1 - 100: 1 standardsuhted
Tavaline harja eluiga 2000+ tundi (varieerub rakenduse järgi)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a self- locking or breaking feature because the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for the application.
Omadused ja eelised
SUUR pöördemomendi võimekus
Iselukustuvad / pidurdavad funktsioonid
Liikumise ülekandmine 90 kraadi
Võimalus toime tulla suurte ülekandearvudega
Kõrge vastupidavus
Low Noise
Paindlik konfiguratsioon
Rakendused
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental Seats / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Motor that will optimize the efficiency of your unique application.
Ehitatud teie ainulaadsete nõuete järgi
Mootori tüüp: harjatud / harjadeta / südamikuta
Pinge
Väljundkiirus
võim
Praegune
Pöördemoment
redutseerimisaste
Võlli materjal ja suurus
Hammasratta materjal
Võlli konfiguratsioon: (D lõigatud / ümmargune / sooneline / muu)
Üldise suuruse parameetrid (L, W, H)
Kodeerija tüüp: optiline / halli efekt
Täiendavad paigaldusnõuded (juhtmed, pistikud jne)
SISSEJUHATUS
The turbo metal gear worm engine uses a metal gear box for toughness and a higher torque output. Because of the special mechanical framework of the worm drive the motor output shaft is definitely self locking and may not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPETSIFIKATSIOON
Tööpinge: 6 - 15 V
Rated Pinge: 12V
Tühikäigu kiirus: 40 p / min
Tühivool: 35 mA
Nimipöördemoment: 32 p / min
Nimivool: 180 mA
Pöördemoment: 2.2 kg.cm
Nimivõimsus: 1.1 W
Seiskumise pöördemoment: 8 kg / cm
Seiskumisvool: 1 A
Reduktsioonisuhe: 1: 150
Kaal: 167 g.
Ussiülekandega EP-ülekandega mootorid - modulaarne ja kohandatav ajamitehnoloogia
Worm gear units from EP DRIVESYSTEMS especially show their strength in applications where high gear ratios are essential. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Kaljune
Meie ussimootoriga mootoritel on suurem ülekoormusvõime
Hooldussõbralik
Washdowni versioonid võimaldavad ajamiprogrammi lihtsat ja tõhusat puhastamist.
Korrosioonikaitse
NSD tupH tihendatud pinna muundamine on erakordselt keemiline, korrosiooni- ja kulumiskindel.
Paindlikkus
Our modular style give users optimum freedom.
Moodulsüsteem maksimaalseks paindlikkuseks: meie EP uss-reduktorid
There are many applications that require drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to satisfy your needs.
Worm gear devices impress with their high power density and small design. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP casing, we offer an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These could be quickly field installed, but we will also be pleased to assemble the average person components for you.
Lisateave meie modulaarsete SI ussiga mootorite kohta!
Uuri rohkem
Clean and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a even, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes this product ideally suited for harsh and demanding industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Ussülekandega mootorid
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different fixing possibilities and enable an easy assembling for the client.
Additional drive configurationscan be created by use of built-on add-ons (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Motor attachment is realised generally by way of IEC adapter B5 or B14A.
Tehnilised andmed
Suuruste arv: 5
Võimsusvahemik: 0.12 - 2.2 kW
Väljundmomendi vahemik: 17 - 230 Nm
Suhe: 5 - 100
Väljundvariant: tulemusvõll, tulemusvõll mõlemal küljel, õõnesvõll, kahaneva kettaga õõnesvõll
Assembly/mounting:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to match, high torque output is necessary, nylon housing and gear, requires light essential oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where an easy to match, high torque result is required
Ideal for student based tasks including robots and buggies
Pööratav suure pöördemomendiga turbo-ussiga mootor JGY370 DC 12V 40RPM
Pööratav suure pöördemomendiga turbo-ussiga mootor JGY370 DC 12V 40RPM
Omadused:
The motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that is, in the case of motor without electrical, the output axis is definitely fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole motor output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Tehnilised andmed:
Mudel: JGY370
Pinge: DC12V
Koormuseta kiirus: 40r / min
Väljundmoment: 5.6 kg.cm
Nimivool: 0.06A
Kaal: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option when compared to spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually an individual start (1 spiral) worm is used. This is often a advantage when it’s desired to eliminate any likelihood of the result driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Funktsioonid ja spetsifikatsioonid:
Metallist käigukast
Result shaft is self-locking because of the worm gear’s characteristic
Nimipinge: 12V DC
Nimiväljundkiirus: 150 p / min
Nominaalne väljundmoment: 117mN.m (1.2kgf.cm)
Seiskunud pöördemoment: 196mN.m (2kgf.cm)
Koormusvool puudub: 60mA
Seisev vool: 1.8A
Väljundvõlli läbimõõt: 6mm koos 4.5mm pesaga
Kaal: 150g